Fully automatic terminal & sleeve processing station
Two sets of crimp presses installed
One set of heat heat-shrinking device installed
Suitable for all types of open barrel terminals
Closed barrel terminals can be custom
JCW-CST18A
Fully automatic terminal & sleeve processing station
Two sets of crimp presses installed
One set of heat heat-shrinking device installed
Suitable for all types of open barrel terminals
Closed barrel terminals can be custom
Dual Crimp Single Shrink
Dual-end Crimping & Single-end Heat Shrinking Machine
The JCW-CST18A is a dedicated single-core wire harness terminator built for insulated terminal protection requirements.
After cutting and stripping, the machine crimps terminals on both wire ends, then automatically feeds, sleeves and heat cures shrink tubing over one crimped terminal to add insulation and strain relief.
Tailored for single-conductor hook-up wires widely used in electronics assembly. It separates the bare crimp terminal and heat-shrink protected terminal in one finished wire, which fits special wiring requirements for PCB connection and internal equipment wiring.
Servo modules deliver precise stripping and crimp consistency.
The English touchscreen supports quick recipe switching for different wire gauges.
CE certification is available for overseas shipments.
You may send wire samples to our workshop for trial run before purchase.
| Model | JCW-CST18A Dual-end Crimping Single-end Heat Shrinking Machine |
| Function | Single/dual end stripping, Full stripping, Partial stripping Single/Dual end terminal crimping, Single-end heat shrink tubing cutting, insertion & shrink Cut depth, Pull-off length. |
| Wire range | AWG 22 - AWG 14 [ 10 AWG on request only ] |
| Raw material | PVC, Teflon, Low halogen, etc. |
| Crimp force | 2 tons [ 20 KN ] |
| Cut length ( L ) | 70 - 99999 mm |
| Cut length tolerance | 0.2mm ± 0.002 x L |
| Strip length | 1 - 10 mm |
| Tubing length | 12 - 30 mm |
| Tubing O.D | 2.5 - 7.0 mm |
| Production rate | 2000 - 4000 pcs/h by 100mm length |
| Detector | Wire lack, Wire knot, Wire stripping, Terminal crimping, Air pressure |
| Optional peripherals | CFM, Wire prefeed machine, Motorized conveyor belt |
| Display | 7" touch screen, English / Chinese [ other languages on request ] |
| Power supply | AC 110 / 220V ± 10%, 50 / 60 Hz |
| Rated power | 2800 W |
| Air supply | 0.5 - 0.8 MPa [ Clean and dry air ] |
| Weight | 700 KG |
| Dimensions | L 1060 x W 950 x H 1500 mm |
| CE-Conformity | Complies with CE equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |